EMTEK, LLC - R100 USERS MANUAL / AUG2019.REV01
51
Section 8
Network Operation of the R100
The Ethernet port is provided to allow for the Calibration of the unit via an external Calibration Software Program. Contact
EMTEK, LLC for more information regarding the Calibration Software Program.
The R100 is equipped with an Ethernet 10Base-T/100Base-T Port that will allow for the P100 PC CONTROL SOFTWARE
program to view or extract the Sample Run Data (Run Data), and/or operate the R100 units connected to the Ethernet. The
Sample Run Data can be downloaded or viewed but cannot be modified while within the unit’s memory. See the P100 PC
CONTROL SOFTWARE Procedure included on the USB drive that shipped with the R100 Package.
Beginning with Firmware Version 1.097, the R100 also includes Mapped Modbus Registers (16-bit) to allow communication,
and unit operation, through customers Facility Monitoring Systems (FMS). EMTEK does not write the drivers required to
communicate with FMS software, but have provided the Modbus Registers on the included USB drive.