41521-2-0520
Page 16
INSTALLATION
A1
C
A2
B
DIMENSIONS (In Inches)
Unit Only
With Outdoor Kit
A1
59
59
A2
59
62
B
57-3/4
58
C
23-1/2
25-1/2
Figure 16
The fireplace can be mounted on any of the following surfaces:
1. A flat, hard combustible or non-combustible surface.
2. A raised wooden platform.
3. Four corner supports. (Example: Four concrete masonry
blocks.) These supports must be positioned so they contact
all four perimeter edges on the bottom of the fireplace, if
allowed by local codes.
NOTICE:
Verify the gas supply and electrical considerations
before beginning the framing.
Framing Information
Fireplace framing can be built before or after the fireplace is set
in place. Position framing to accommodate wall covering and
fireplace facing material. Construct the fireplace framing with
2 x 4 lumber or heavier.
If outdoor kit is installed, header
must be metal studs.
Refer to the
INSTALLATION TABLE
for
minimum framing dimensions.
CAUTION
Before construction begins, measure fireplace dimensions
and verify framing methods and wall covering details.
