20
|
ENGLISH
2.
By default no PIN code is set for this alarm group. You can check the option ‘Use
a PIN code to enable this alarm’ to enable a PIN code for this alarm.
3.
You can now setup a PIN code at your desire. You can change the PIN code by
clicking on ‘Change PIN’. A new page will appear. First enter the ‘Old PIN’ (1234
by default), then enter the ‘New PIN’. Confirm the new PIN code in the field
‘Repeat PIN’. Click ‘Save’ to save the settings and automatically go back to the
previous page.
4.
Select the Alarm Sensors. You can select one or more alarm sensors to be used
in for this night alarm.
5.
Set one or more Alarm Events. You can let the e-Centre execute a selected
scene on one of the alarm events. Below a list of the events and a example
a.
Alarm not available: If you want the e-Centre to execute a scene if the
alarm is not available, select the desired scene.
b.
Alarm armed: Once the alarm is armed the e-Centre can execute the
scene ‘All off’ to switch off all lights, for example.
c.
Alarm fired: Once the alarm is fired the e-Centre can execute the
scene ‘All on’, to switch on all lights to scare off the intruder.
d.
Alarm disarmed: If you disarm the alarm (by entering the correct PIN
code) the e-Centre will execute this scene.
e.
Entry time: During the entry time the e-Centre can execute this scene.
For example, use a scene to enable the lights in your hallway. This
allows you to find your way to the e-Centre.
f.
Exit time: During the exit time the e-Centre can execute this scene. For
example, use a scene to enable the lights in your hallway. This allows
you to find your way to the door when exiting your house.
6.
Set the time settings.
a.
Entry Time: This is the time in seconds you need to go to the e-Centre
and to disable the alarm. It is recommended to check this carefully and
to try this setting once it has been set. If necessary change the setting
to your desire.
b.
Entry Sound: The e-Centre will play the selected sound when walking
to your e-Centre 2.
c.
Entry Sound Interval: This is the interval the e-Centre should use to
play the Entry Sound.
d.
Exit Time: This is the time in second you need to exit your house, from
the e-Centre to the (front) door, once you have entered the PIN code. It
is recommended to check and try this setting once it has been set. If
necessary change the setting to your desire.
e.
Exit Sound: The e-Centre will play the selected sound when going to
bed.
f.
Exit Sound Interval: This is the interval the e-Centre should use to play
the Exit Sound.
7.
Set the Siren Settings.
a.
Siren Sound: The e-Centre will play the selected sound when the alarm
is fired
Содержание e-Domotica e-Centre 2
Страница 1: ...EM6505 e Domotica e Centre 2 Control Panel...
