23
|
ENGLISH
Image 16. Click on the x button (shown in the red circle) to close this window)
3.6.2 Sensor Triggered Scene
You can use the EM6581 Motion Sensor to trigger a scene. For example, enable the
lights in a room when motion is detected by the sensor.
1.
Click ‘Choose’ to start the special wizard. You will see the following page.
Image 17. Setup a sensor triggered scene
2.
Enter a description.
3.
Select a sensor to be used for this situation.
4.
If you want to let the e-Centre execute a scene when motion is detected (sensor
On), select the checkbox ‘Activate a scene when the sensor is ON’.
5.
Select a desired scene to be executed.
6.
Enable the option ‘Activate a scene when sensor is OFF’ if you want a scene to
be executed when the sensor stops detection motion.
7.
Select a desired scene to be executed.
8.
Click ‘Save’ to save the settings and to return automatically to the previous page.
If you need to edit or add a scene at this stage, you can click ‘Scene Editor’. This will
open a window in front of the page to edit/add a scene. You can close this window
using the x button in the top of the window.
Содержание e-Domotica e-Centre 2
Страница 1: ...EM6505 e Domotica e Centre 2 Control Panel...
