Emerson Rosemount 2240S, Справочное руководство, Страница: 73 / 194

63
Reference Manual
00809-0100-2240, Rev DA
Configuration/Operation
October 2017
Configuration/Operation
Auto configuration using the Average DIP switch
The Average switch enables automatic configuration of the Rosemount 2240S according to the default
settings in
Table 5-4 :
Table 5-4. Auto Configuration Parameters
In the TankMaster WinSetup configuration tool, automatic configuration can be enabled in the
configuration window for the Rosemount 2240S transmitter (2240 MTT Temperature Sensor tab in the
22XX ATD window).
In case the installation does not match the default setting for Auto Configuration you will have to
configure the temperature sensor manually. See configuration of ATD devices in the
Rosemount Tank
Gauging System Configuration Manual for more information.
Note
Manual configuration may override the switch settings.
For more information on the various configuration parameters, see “Basic configuration” on page 50 .
Configuration
Parameter
Switch in on (Average) position Switch in off position (default)
Element Type Average Spot
Element Wiring
Common Return
See Figure 4-9 on page 45
Common Return
See Figure 4-9 on page 45
Conversion Method Cu90 Pt100