Emerson Rosemount 2240S, Справочное руководство, Страница: 132 / 194

122
Reference Manual
00809-0100-2240, Rev DA
Service and Troubleshooting
October 2017
Service and Troubleshooting
Table 6-4. Status registers for the Rosemount 2240S Multi-input Temperature Transmitter
Message Description Action
Device Status
Input register no. 100 (1) .
Bit 1: Device warning
Bit 7: Device error
Bit 8: Simulation Mode Active
Bit 9: PTB Mode Active
Bit 10: PTB Resistance Out Of Limit
Bit 16: FF Block Out of Service (1.B0)
Bit 18: Device Write Protected
Bit 19: Factory setting used (default
database)
1. The register number refers to the internal Input Register in the Rosemount 2240S database.
Contact Emerson Automation
Solutions/Rosemount TankGauging
service department for support.
Device error
Input register no. 102.
Bit 0: RAM Error
Bit 1: FPROM Error
Bit 2: HREG Error
Bit 3: SW Error
Bit 4: Other memory error
Bit 6: Reserved for Display error
Bit 7: Reserved for Modem error
Bit 9: Internal temperature error
Bit 10: Other HW error
Bit 11: Measurement Error
Bit 12: Configuration error
See “Device errors” on page 124 for
more information on the various error
types.
Contact Emerson Automation
Solutions/Rosemount TankGauging
service department for support.
Device warning
Input register no. 104.
Bit 0: RAM Warning
Bit 1: FPROM Warning
Bit 2: HREG Warning
Bit 3: SW Warning
Bit 4: Other memory warning
Bit 6: Reserved for Display warning
Bit 7: Reserved for Modem warning
Bit 9: Internal Temperature Warning
Bit 10: Other HW warning
Bit 11: Measurement warning
Bit 12: Config warning
See “Device warnings” on page 123 for
more information on the various
warnings.
Contact Emerson Automation
Solutions/Rosemount TankGauging
service department for support.
Internal temp Input register no. 106. Internal temperature.
Contact Emerson Automation
Solutions/Rosemount TankGauging
service department for support.
Internal temp
status
Input register no. 108.
Bit 0: Internal temperature out of limits
Bit 1: Temperature Device Error
Bit 15: Internal temperature not valid
MinIntTemp
Input register no. 110. Minimum measured
internal temperature.
MaxIntTemp
Input register no. 112. Maximum measured
internal temperature.