User Manual
Chapter 5
GFK-2847Y
Aug 2020
Mounting and Installation
57
WARNING
Do not recharge, disassemble, heat or incinerate lithium batteries.
Dispose of lithium batteries in accordance with federal, state, and local regulations. Be
sure to consult with the appropriate regulatory agencies before disposing of batteries.
CAUTION
1.
Replacing the battery should only be performed by trained personnel and in a non-
hazardous location.
2.
If the QuickPanel
+
Operator Interface is VESA mounted, detach from the VESA arm
when replacing the battery.
3.
The battery should only be replaced when the unit is powered off.
4.
Care should be taken to protect and insert the battery with correct polarity.
5.
Do not use any metallic item to remove the battery (such as screwdrivers, knives,
pliers, and so forth).
6.
Be careful to not drop the battery or any associated screws into the unit.
7.
Be careful of edges on internal sides of the enclosure and frame.
Attention
The PC controller does not start automatically when the battery is
replaced in QuickPanel
+
Operator Interface. After battery
replacement, start the controller using the #Command in the PAC
Machine Edition runtime.
5.6.1
IC755CxS06RDx
To install or replace the battery for IC755CxS06RDx:
CAUTION
Replace the battery for the IC755CxS06RDx only with Emerson battery part number
IC755ACCBATT.
1.
Remove the battery cover by pressing down while sliding outward.
