User Manual
Chapter 5
GFK-2847Y
Aug 2020
Mounting and Installation
55
5.
Tighten the screws on the mounting bracket in a clock-wise direction.
Figure 61: Tighten Screws
Torque Range for Mounting Clamp Screws
Display Unit
Torque Range
IC755CxS06RDx
0.3 Nm (2.66 in-lb)
IC755CxW07CDx
0.3 Nm (2.66 in-lb)
IC755CxS10CDx
0.7 Nm (6 in-lb)
IC755CxS12CDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
IC755CxS15CDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
5.5
VESA Arm Mounting
The QuickPanel
+
unit can be installed on a commercially available Video Electronics
Standards Association (VESA) MIS-D arm, stand, or apparatus that complies with the
UL1678 standard.
Note:
Refer to the mounting arm manual for instructions.
To VESA mount the QuickPanel
+
unit: use the mounting holes located on the back of the
unit (refer to Figure 62 and Figure 63).
•
The mounting holes for IC755CxS06RDx and IC755CxW07CDx attach with M4 screws
that are 6 mm (0.24 in) or less in length.
•
The mounting holes for IC755CxSxxCDx attach with M4 screws that are 8 mm (0.32 in)
or less in length.
Torque Range for Mounting M4 Screws
Display Unit
Torque Range
IC755CxS06RDx
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
IC755CxW07CDx
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
IC755CxSxxCDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
