User Manual
Chapter 3
GFK-2847Y
Aug 2020
Software
18
CAUTION
Before disconnecting power, verify that the copy or update operation is complete (no busy
message or wait cursor).
To copy a PAC Machine Edition project to an SD card
1.
Verify that there is a blank SD card in the SD card port.
2.
Double tap the Copy Project to SD Card icon on the desktop.
3.
If the project is secured with an enhanced security password, then the password
authentication window will be displayed. The user shall be able to proceed only
when the password is successfully authenticated.
4.
From the Copy Project Query confirmation window, tap Yes.
CAUTION
Copying a project while PAC Machine Edition runtimes are active may cause an incomplete
copy to be created if the runtimes are also writing to files in the project folders. If the utility
detects this situation, it will notify you to stop the runtimes before making the backup. You
will not be able to create a backup while the runtimes are writing files.
3.5
PAC Machine Edition Project Update
Update a PAC Machine Edition application that is currently stored on the QuickPanel
+
unit
with a revision stored on a flash device, such as an SD card.
To update a Machine Edition project
1.
Insert the flash device containing an upgraded version of the PAC Machine Edition
project into the appropriate port.
2.
Restart the unit.
Note:
Depending on set options, the update may or may not be enabled, or may update
automatically. If there is more than one flash device with a valid project copy present, a
Select Media confirmation window displays, prompting you to choose with which flash
device to update Select the device from the list and click OK to continue. When a valid project
is found on the flash device, you will be prompted to install the project or skip it. Tap OK to
install or Cancel to skip the installation, and continue to restart. If an invalid project is found,
an error message displays. This window must be closed before the unit will restart.
3.
Remove the flash device from the port.
3.6
FTP Server
The File Transfer Protocol (FTP) server included with the QuickPanel
+
unit supports standard
(RFC 959). It does not support Secure File Transfer Protocol (SFTP) or implicit FTPS, which
uses different ports and is based on Secure Shell (SSH) rather than Secure Sockets Layer
(SSL).
