FloBoss 107 Instruction Manual
7-6
Troubleshooting
Revised June-2017
7.3.4
Preserving Configuration and Log Data
Before you power down the FB107 to repair or upgrade, to remove or add
a component, or to troubleshoot, you should preserve the FB107
configuration and log data held in RAM.
Caution
When installing equipment in a hazardous area, ensure that all
components are approved for use in such areas. Check the product
labels. Change components only in an area known to be non-
hazardous. Performing these procedures in a hazardous area could
result in personal injury or property damage.
To avoid circuit damage when working inside the unit, use appropriate
electrostatic discharge precautions, such as wearing a grounded wrist
strap.
1.
Connect to ROCLINK 800 and connect to the FB107.
2.
Ensure that the configuration is saved in flash memory. Select
ROC >
Flags >
Save to Flash Memory
. This saves all configuration settings,
including the current states of the ROC Flags and calibration values.
3.
Select
ROC >
Collect Data
.
4.
Type the desired
File name
for the backup file, or use the default.
5.
Click
Save
.
6.
Click
OK
. This saves event logs, alarm logs, report data, and history,
but not non-EFM history points. You can specify your own file name
and path if desired.
7.
Select
File >
Save Configuration
. The Save As dialog box appears.
8.
Enter a
File name
.
9.
Click
Save
. ROCLINK 800 saves the file in the default directory
C:/Program Files/ROCLINK 800/Data unless you changed the
directory.
7.3.5
ROCLINK 800 Configuration Software
If you are experiencing problems with the FB107 that appear to be
software
-related, try resetting the FB107.
Note
:
Download history, events, and alarm logs prior to a restart.
Before
you attempt any type of reset, back up your configuration and log
data. Refer to
Preserving Configuration and Log Data
.
Use a warm start to restart without losing configuration or log data.
To perform a warm start, open ROCLINK 800 software, connect to
the FB107 and select
ROC
>
Flags
. Click
Warm Start
on the Flags
screen.
Содержание FloBoss 107
Страница 58: ...FloBoss 107 Instruction Manual 3 8 Power Connections Revised June 2017 This page is intentionally left blank ...
Страница 104: ...FloBoss 107 Instruction Manual 5 18 Communications Revised June 2017 This page is intentionally left blank ...
Страница 151: ...FloBoss 107 Instruction Manual Revised June 2017 Index I 7 This page is intentionally left blank ...
