6
Technical data
Section 1: Introduction
Owner and operator manual
January 2015
3-9008-001 Rev M
Interface parameters:
•
Replacement parts:
Use only replacement parts specified by Daniel.
Unauthorized parts and procedures can affect this
product’s performance and place the safe operation
of your process at risk.
•
After market attachments:
Use of pressure sensing equipment, drain valves and
other accessories (e.g., needle valves, multi-port
valves, transmitters, 3- pin recorders...etc.) are
permissible. The use of after-market equipment must
be installed and operated as directed by the after-
market equipment manufacturer, and their
warranties and replacements are not contained
within the scope of this document.
•
Pipe supports:
Support the flow measurement system (or meter
tube) at regular intervals to prevent bending due to
the weight of the system, as well as the weight of the
measured fluid. Since all meter tubes are unique, it is
important that an engineer design a piping system,
which can place support for each tube during regular
intervals. Proper support placement can reduce the
potential of creating stress at welded joints and
flanges, which may lead to leaks and may ultimately
lead to failure or rupture of the flow measurement
system.
•
Vandalism / Tampering:
It is the responsibility of each product owner to
protect the Senior from vandalism, tampering or
other unauthorized activity.
*
Indicates standard “A” Trim product. For applications outside parameters above please
consult the factory.
Содержание Daniel Senior Orifice Fitting Series
