Emerson Daniel 3814, Руководство по установке

Страница: 24 / 110

Table 1-2: Meter specifications
(continued)
Liquid Meter specifications
Frequency/Digital Output(s) The meter has user-configurable selections for
either a frequency output or digital status
(FODO) (Also
Frequency/Digital outputs ).
Frequency/Digital Outputs
• FODO1 (eight possible output
configurations)
• FODO2 (eight possible output
configurations)
• FODO3 (eight possible output
configurations)
• FODO4 (eight possible output
configurations)
• FODO5 (eight possible output
configurations)
• FODO6 (eight possible output
configurations)
Frequency or Digital Output parameter pairs
(
Frequency/Digital outputs )
Frequency or Digital Outputs (FODO 1, FODO2,
FODO3, FODO4, FODO5, FODO6) source
selections.
• (FO1A, DO1A, FO1B, DO1B, FO2A, DO2A,
FO2B, DO2B)
Mode options:
• Open Collector (requires external excitation
supply voltage and pull-up resistor)
• TTL (internally powered by the meter 0-5
VDC signal)
Channel B Phase options:
• Lag forward, Lead reverse (Phase B lags
Phase A while reporting forward flow, leads
Phase A while reporting reverse flow)
• Lead forward, Lag reverse (Phase B leads
Phase A while reporting forward flow, lags
Phase A while reporting reverse flow)
Phase A and Phase B output (based on flow
direction)
• Reverse flow - output only reports flow in the
reverse direction. For frequency outputs,
Phase B of the output is 90 degrees out of
phase with Phase A.
Introduction Installation manual
May 2019 3-9000-760
24 3814 Liquid Ultrasonic Flow Meter