EMBRON Hatteland Technology HTC03 AC Series, Руководство пользователя

Страница: 35 / 150

35
IND100133-79
User Controls
2 x 2.5” Removable SATA SSD Trays (only Standard model):
The unit can utilize 2 x Storage Devices (SSD), 2.5” size. (1 x tray is by factory default occupied, Device #0 ).
The storage devices can be easily be upgraded or replaced by pulling the SSD tray out.
Both trays feature a locking mechanism (using quarter-turn fasteners to lock/unlock) function to prevent accidental
removal and to secure the device additionally.
How to Remove or Replace SSD Device
The unit must be shut down / powered off before proceeding. After unlocking the tray by unscrewing the thumbscrews
(FIG 1) pull out the tray carefully by hand (FIG 2), please proceed as illustrated below.
FIG 2
FIG 3
Pull out the casing gently as indicated. The tray
shown here does not have a Storage Device
already in-place.
Unscrew 4 pcs x M3x4mm Phillips countersunk screws as
indicated. Replace or remove the device as needed. Make
sure the device connects with the interface connector
located in the end of the tray prior to fastening screws.
Screwdriver: Philips PH2
Tightening torque 0.4Nm.
Repeat the procedure in reverse (FIG3-2-1) to mount.
Locked/unlocked by quarter-turn fasteners with springs.
To unlock, turn 90 degrees anti-clockwise.
To lock, push the quarter-turn fastener in and turn 90
degrees clockwise.
FIG 1
Single Front Removable Tray and Pre-mounted Storage
Device are available from Hatteland Technology as accessory.
Typenumber : HD xxxyy SX1-z1
Where x = : Size
Where y = : MB, GB, TB
Where z = : Physical Format / Device Type
(Physical Format examples: 2.5”)
(Device Type examples: SSD)
Please review datasheet for your model to determine Size, Format
and Device Type compatible with your model.
or Empty Front Removable Tray 2.5” (without screws):
Typenumber : HD 000TR SX1-A1
or Empty Front Removable Tray 2.5”
+ 4 x M3x4mm Phillips Countersunk Screws:
Typenumber : HD 000TR SX1-A3
FIG 4 (Optional)
Extra locking mechanism inside computer to prevent SSD(s) from being removed
unintentionally or by unauthorized personnel. Not mounted by Factory default.
See Cabinet cover removal procedure in General Installation
Recommendations chapter for instructions on how to remove the Cabinet cover.
To lock SSD(s) in place, add and mount M3 screw(s) as indicated.
Follow SSD manufacturer’s instructions for screw length and torque.