EMBRON Hatteland Technology HTC03 AC Series, Руководство пользователя

Страница: 28 / 150

28
IND100210-67
General Installation Recommendations
Installation
Mounting Bracket Kit (Wall / Desktop) HTC03
Mounting Bracket Kit (HT MBK STD-C1: Mounting Bracket Kit HTC03/HTC04 - L-Shaped).
Note: Areas of interest are marked in this section with symbols in RED color.
Note: In order to secure the unit properly, please use only the screws delivered with the unit. Choosing own screws
and longer than factory specified may cause permanent damage inside the unit and Warranty will be void !
▼ 1: Place the complete unit onto your desired
location (i.e. desktop/wall) and mark the positions
you need to drill. The drilling hole should be M5.
The space under the location should allow for M5
locking nuts. Max thickness of mounting area/
plate is 8mm. If your mounting area/plate is thicker,
please assure you acquire longer screws specified
as “M5x20 or larger Unbrako DIN912 Black”. View
below is TOP VIEW.
▼ 2: Prepare the brackets, one on each side of the unit as
indicated. Make sure the bracket is rotated correctly by
aligning as red line show below.
▼ 3: Mount each bracket onto lower part of unit,
using 3 pcs M4x8 Black Torx DIN7046 on each side of the unit. Use Torque Force: 2.0 Nm