emaux SSC mini, Руководство пользователя

Страница: 5 / 12

5
6.2 TYPE OF SALT
The most common salt used in swimming pools with Salt Electrolysis is Sodium Chlorine (NaCl) that is
99% pure. DO NOT use the following types of salts:

rock salt;

salt with more than 1% yellow prussiate of soda;

Salt with more than 1% of anti-caking additives;

Iodized salt.
6.3 ADDING AND REMOVING SALT
Before adding the salt into the pool, turn your filtration pump on and set your filtration valve manifold in
position “Filtration”. Add the salt directly into the pool or balance tank and do not allow the salt to sit in
a pile on the bottom of the pool.
Keep the filtration system running for 24 hours using a main drain or a
vacuum suction nozzle as a main suction line.
The only way to remove the salt in the pool water is to partially drain the pool and refill with fresh water.
7. INSTALLATION
7.1 CONTROL UNIT INSTALLATION
The Emaux SSCmini ® control unit is contained in a raintight enclosure that is suitable for outdoor
mounting (IPX4 rating). However, the following points must be taken into consideration for a correct
installation of the control unit:
1.
Install the Control Unit using the mounting template provided with the package. The unit should be
installed in a minimum distance of 3 meters from the swimming pool, 1.5 meters from the ground,
within 2 meters from electrical enclosure, and within 3 meters from where the cell will be installed.
2. Fix the mounting template on the wall
and d
rill 4 holes with a diameter of 8mm in the wall according
to the mounting template (Figure 1). Use expansion bolts to support the control unit.
3. Hang the control box on the fixed bolts (Figure 2) and make sure that the power cable and cell cable
also reach the Control Unit.
4. Don’t install the control unit under direct sun light.
5. The control unit should be installed away from chemicals storage.
6. The unit must be kept away from heat sources and any equipment which produce heat.
7. Plug-in power supply into a suitable weatherproof outlet socket with circuit breaker.
Figure 1
Figure 2