emaux SSC mini, Руководство пользователя

Страница: 4 / 12

4
near flammable materials.
This equipment should never be installed in places susceptible to flooding.
It is important to reduce chlorine production properly while the pool is covered. Otherwise, an excess of
chlorine could degrade the pool materials.
6. WATER CHEMISTRY
The following table shows the recommended levels of the chemical parameters required for a proper quality
of water in the pool by using Emaux
SSCmini
®
.
Test your water periodically and ensure the levels are within the recommended range.
Salt Level 4000 – 6000 ppm
Free Chlorine 1.0 – 3.0 ppm
pH Value 7.2 – 7.6
Cyanuric Acid (stabilizer) 30 – 50 ppm
Total Alkalinity 80 – 120 ppm
Calcium Hardness 200 – 400 ppm
Metal 0 ppm
6.1 SALT LEVEL
The amount of salt required when using Emaux SSCmini ® is between 4000 and 6000 ppm. To reach
this concentration, it is necessary to 4 kg of salt per each cubic meter of pool water.
Low salinity (below 2500ppm) will cause premature cell failure. High salinity (above 6000ppm) will result
in electro-oxidation and the corrosion of stainless steel swimming pool fixtures.
Salt required according to the pool volume:
Pool volume (m
3
) Salt (kg) Pool volume (Gallon) Salt (Pound)
10 40 2,642 88
15 60 3,963 132
20 80 5,283 176
25 100 6,604 220
30 120 7,925 264
35 140 9,246 308
40 160 10,567 352
50 200 13,209 440
60 240 15,850 528
70 280 18,492 616
80 320 21,134 704
90 360 23,775 792
100 400 26,417 880
Note: Table based on 4000 ppm of salt per m
3
of water.