Toro 115-4029, Руководство по установке

Страница: 1 / 12

Form No. 3360-523 Rev A
Heavy-Duty Air Filter Kit
for TRX Trenchers
Model No. 115-4029
Installation Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the existing air cleaner.
Intake pipe 1
Gasket 1
2
Breather tube 1
Install the intake pipe.
Engine mounting bracket 1
Canister assembly 1
Flange-head bolt 3
Washer 2
Lock washer 2
Nut 2
3
Plug 1
Install the air cleaner.
Large air hose 1
Hose clamp 3
4
Weather cap 1
Connect the air cleaner to the engine.
1
Removing the Existing Air
Cleaner
No Parts Required
Procedure
1. Stop the machine on a level surface, stop the engine,
remove the ignition key, and lower the boom.
2. Allow the engine to cool completely before
continuing.
If the engine has been running, the muffler
and muffler guard will be hot and could burn
you. This procedure requires you to touch the
muffler guard.
Allow the engine and muffler to cool completely
before installing this kit.
3. Close the fuel shutoff valve.
4. Clean all dirt and debris from the machine.
5. Remove the air cleaner cover (Figure 1).
Figure 1
1. Air cleaner cover
6. Remove and discard the breather tube from the
engine and carburetor (Figure 2).
© 2008—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved