background image

www

.onfilter

.com

www

.onfilter

.com

1

CleanSweep

®

AC EMI Filters
for Soldering

APxxxxLG Series

User’s Guide

4

Specification

Rated Voltage, RMS

110...250V AC (refer to filter’s label)

Rated Current, RMS

3A

Power Line Frequency

50/60 Hz

Transient Signal Attenuation (Typical) 0.1/100 Ohms Interface

Differential Mode

24dB

Common Mode

20dB

Continuous Signal Attenuation (Typical) 0.1/100 Ohms Interface

Low Frequencies

50dB

High Frequencies

25dB

Power Indication

LED

Dimensions (WxDxH)

3.12”x1.85”x5.0” ( 80x47x127mm)

Ambient Temperature

+5

0

 .. . 40

0

C

Climatic Category

+05/040/00

Filter Care

Normally, filter requires no maintenance and no calibration.  It is recommended, though, to
periodically inspect filter for overheating and to clean its surface with dry cloth.

During its normal operation filter may have elevated temperature
which would feel “warm” to the touch, but not what is considered
“hot.”  If the filter does feel “hot” to the touch (more than 70

0

C or

158

0

F), turn your equipment off, disconnect filter from the circuit

and discontinue using it.  For warranty or other repairs contact
factory or its authorized distributors.  Full text of warranty can be
found in the Library section at www.onfilter.com

Patent Pending. All specifications are subject to change without notice.  Made in U.S.A.

Please r

ec

yc

le

. Printed in USA.

 © 2014 OnFIL

TER,

 Inc

.  

All rights r

eser

ved.

 

PUB03203

Typical Performance of CleanSweep

®

 Soldering Filter

Current from the iron’s tip without CleanSweep

®

 filter

Current from the iron’s tip with CleanSweep

®

 filter

OnFILTER, Inc.

730 Mission St. Ste.102
Santa Cruz, CA 95060 USA
Tel. +1.831.824.4052
FAX +1.206.350.7458
www.onfilter.com
[email protected]

4010859

AC outlet may vary depending
on the specific model

Included:

APxxxxLG Filter

1 ea.

Power Cord

1 ea.

Отзывы: