75
GB
• The appliance is equipped with adjustable feet, so that the height may be adjusted to
level the cooler on uneven floor surfaces.
• We recommend that two people carry out this procedure.
• The height must be adjusted prior to building the appliance into the housing unit and it
should be set at such a height that the top panel of the appliance fits exactly below the
kitchen worktop.
ADJUSTING THE HEIGHT AND LEVELLING
YOUR WINE COOLER
• The appliance height is set at 865 mm at the factory; it can be adjusted between 865
and 920 mm by adjusting the feet.
• Tilt the appliance carefully to approximately 60° to allow access to the adjustable feet.
• Take care to ensure the cooler is supported at all times.
• Turn each foot as required to level the cooler at a height of between 865 and 920 mm.
MODEL: CWI5070S
• Repeat these steps for the other adjustable feet.
• The appliance height is set at 820 mm at the factory; it can be adjusted between 820
and 870 mm by adjusting the feet.
• Tilt the appliance carefully to approximately 60° to allow access to the adjustable feet.
• Unscrew and remove the feet. Take out the longer feet (110 mm) from the accessory
pack supplied with the instruction manual, then screw them in and adjust them to level
the cooler at a height of 865 to 920 mm.
MODEL: CWI5200S / CWI5520S
Содержание CWI5070S
