73
GB
IMPORTANT: Before installation and usage read all the instructions and make sure that
the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same
as the voltage and frequency in your home. The rating plate can be found on the front
left edge of the inside of the wine cooler.
The manufacturer declines all responsibility in the event of the installer failing to observe all
the accident prevention regulations in force, which are necessary for normal use and the
regular operation of the electrical system.
Installation
The plug must only be connected to an earthed wall socket (if you use an unearthed
wall socket it will endanger your own safety and the safety of others). Make sure the
wall socket is correctly and reliably earthed. Do not connect a damaged appliance to
a wall socket. Do not insert the plug if it is damaged or loose. Otherwise there is a risk
of electric shock or fire. IMPORTANT! If the power cord is damaged it must be replaced
by the manufacturer, the manufacturer’s service agent or a competent person to avoid
danger. If new supply wiring is needed, enlist a qualified electrician and ensure that
an earthed socket is installed for the appliance.
We recommend that the appliance is
connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
ELECTRICAL CONNECTION
• It is advisable that your appliance is only installed in a location where the ambient
temperature of the room corresponds with the climate classification that is stated on
the rating plate of your appliance. Your appliance may not function correctly if the
ambient temperature falls outside of the following ranges. This product has the climate
classifications N and ST according to table below.
POSITIONING
Climate classification
Appropriate ambient temperature
SN
+10 to +32 degrees centigrade
N
+16 to +32 degrees centigrade
ST
+18 to +38 degrees centigrade
T
+18 to +43 degrees centigrade
• Positioning the appliance requires two people in order to avoid injuries or damage to
the appliance.
• Your appliance should not be located in direct sunlight or exposed to continuous heat
or extremes of temperature (e.g. next to a radiator or boiler). If this is not feasible, then
you should install an insulation plate between the appliance and the adjacent heat
source.
• You should check whether there is an electrical socket available that will remain
accessible after your appliance is installed.
Содержание CWI5070S
