41
GB
You can cancel the reminder during setting by pressing the stop button; After the
reminder has been set, you can cancel it by pressing the stop button twice.
7. Start/Pause/Cancel Function
If the cooking time has been set, press ”
” to start cooking. If the cooking is pau-
sed, press ”
” to resume cooking.
During cooking process, press ”
” once to pause cooking. Press ”
” twice to
cancel cooking.
8. Energy-Saving Function
1. In waiting state and reminding state, press ”
” for three seconds, the LED dis-
play will go off and enter energy-saving mode.
2. If there is no operation within 10 minutes during waiting state, the LED display
will go off and enter energy-saving mode.
3. Under energy-saving mode, pressing or rotating any key can quit the energy-
saving mode.
9. Pyrolytic Function
This function allows you to thoroughly clean the oven cavity.
1. Rotate ”K1” to select the pyrolytic function. LED will display ”PyR”.
2. Press ”
” to confirm cooking. The default time is 2 hours, and ”PyR” will be
displayed on the LED.
3. Rotate ”K1” to change the pyrolytic time. The timer can be set to 1:30 or 2:00
hours.
NOTE:
A) When the oven door is not closed, pressing start button will be invalid, LED dis-
play ”door”, ”PyR”.
B) When the oven’s centre temperature is higher than 320°C, pressing start button
will be invalid. The LED will display ”Cool” and ”PyR”. When the oven’s cen-
tre temperature is lower than 200°C, press cancel button once to pause; press
again to return to waiting state. If higher than 200°C, press cancel button once
to return immediately to waiting state.
C) Open the door when the oven is on, the LED will display ”door” and the buzzer
will sound continuously until the door is closed or press cancel button.
D) Before activating the pyrolytic cleaning function, remove any excessive spillage
and make sure that oven is empty. Do not leave anything inside it (e.g. pans,
baking tray, dripping pan, slider bracket etc.) as this may significantly damage
them.
E) When pyrolytic cleaning is finished, do not change the power setting for one
hour.