37
GB
ventilation.
IMPORTANT
In order for the oven to work properly,
the kitchen housing must be suitable.
The panels of the kitchen unit that
are next to the oven must be made
of a heat resistant material. Ensure
that glue used in veneered wood
units can withstand temperatures of
at least 120ºC. Plastics or glues that
cannot withstand such temperatures
will melt and deform the unit. Once
the oven has been situated inside the
units, electrical parts must be com-
pletely insulated. This is a legal safety
requirement. All guards must be firmly
fixed into place so that it is impossible
to remove them without using special
tools. Remove the back of the kitchen
unit to ensure adequate air circulation
around the oven. The hob must have a
rear gap of at least 45 mm.
DECLARATION OF
COMPLIANCE
When you have unpacked the oven,
make sure that it has not been dama-
ged in any way. If you have any doubts
at all, do not use: contact a professio-
nally qualified person. Keep pack
-
ing materials such as plastic bags,
polystyrene, or nails out of the reach
of children as they are dangerous to
children.