GB
45
Important!
Support the door during step 4 to prevent it from
dropping.
4. Remove the screws
1
, disconnect the ground cable
2
and remove part
3
.
5. Lift off the door and place it on a flat surface with the
outside facing upwards. Remove part
4
and undo
the screws
1
as shown in the diagram. Transfer the
handle
2
to the opposite side, secure with the screws
1
and then fit the cover plugs
4
in the empty screw
holes.
Remove the screws
6
, remove parts
4
and
5
, turn
the parts around
5
and refit parts
4
and
5
to the
other side using the screws
6
.
1
1
1 2
3
4
5
6
6. Tilt the cabinet backwards with the aid of an assistant,
unscrew part
3
and undo the screws
4
. Remove part
2
and
1
.
1. Bottom hinge 2. Plate 3. Adjustable feet 4. Screws
7. Unscrew the bottom hinge, transfer it to the other side
and screw it in place, with the washer.
8. Refit the parts in reverse order from step 6, moving parts
1
and
2
to the opposite side and securing them with
the screws
4
. Finally, fit part
3
.
1. Screws (3)
2. Ground cable
3. Top hinge
1. Screw
2. Handle
3. Cover plug
4. Door stop
5. Stop block
6. Screw
NOTE! The washer
may stick to the door
Washer