WOP-12ac-LR. Quick guide for FBWA configuration via web interface
20
•
1.
Make active
– a button that allows you to make a backup version of the firmware active, this will require a
reboot of the device. The active firmware version will not be set as a backup.
To start the update process, you must click the
«Upload file»
button. The process may take several minutes (its
current status will be shown on the page). The device will be automatically rebooted when the update is
completed.
3.5 Configure Wi-Fi connection to the base station
Connect to the web interface (see Section
Connection to the WB-1P-LR web interface
click on the link
«More»
:
A page opens with a complete list of settings for Wi-Fi.
2. In the
«Network Identifier (SSID)»
field, enter the name of the Wi-Fi network to which the device will
connect. If you use a Wi-Fi network without encryption to connect, then select
«Off»
in the
«Security mode»
field. If you use a Wi-Fi network with encryption for the connection, in the
«Security mode»
field, select the
encryption mode that is configured on the base station and specify additional parameters (WPA key/
username and password).
Do not switch off or reboot the device during the firmware update.
