WOP-12ac-LR. Quick guide for FBWA configuration via web interface
18
•
•
•
•
•
•
3 WB-1P-LR configuration
3.1 Connecting the device to PC
PoE technology is used to power the device, allowing it to transfer power through a UTP cable. A PoE injector is
used to connect. Connect the device to the
«Data & Power»
connector of the injector, and the computer to the
«Data»
connector. Connect the injector to the household power supply.
3.2 Configuring computer network interface settings
Install the following network interface settings on the computer:
IP: 192.168.1.5
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
3.3 Connection to the WB-1P-LR web interface
To connect to the web interface of the device, enter the following to the URL bar of your browser:
192.168.1.1
The authorization page will open, enter:
Login:
admin
Password:
password
3.4 Firmware update:
In the system settings, click on the link
«More»
:
