ELTEX WOP-12ac-LR, Быстрое руководство

Страница: 10 / 32

WOP-12ac-LR. Quick guide for FBWA configuration via web interface
10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Radio – selects wireless Wi-Fi interface;
Status – configurable Wi-Fi interface status:
On – when checked, the Wi-Fi interface is enabled;
Off – when checked, the Wi-Fi interface is disabled.
Mode – operating mode of the radio interface:
IEEE 802.11a/n/ac – 5 GHz frequency range, maximum data rate of 867 Mbps in a 2x2 MIMO
scheme.
Channel – channel number for work of wireless network. If you select «Auto», the channel with the least
number of working access points on this channel is automatically determined taking into account the
specified region;
Channel Bandwidth – channel bandwidth (available for 802.11n/ac modes). The 802.11n specification
allows you to use a 40 MHz channel width in addition to the 20 MHz channel width used in other modes.
Using channels with bandwidth of 40 MHz can increase the data transfer rate, but reduces the number of
disjoint channels. The 802.11ac specification allows the use of a channel width of 80 MHz in addition to the
possible values of 20 MHz and 40 MHz;
Transmit Chain – antenna activity flags. When checked, the corresponding antenna is enabled;
VLAN list – list of VLANs allowed for broadcasting. This setting is relevant for the VAP operating mode -
VlanTrunk.
Radio1 configuration example:
Radio – select value «1» ;
Channel – set «Auto» ;
Channel Bandwidth – set «80 MHz» ;
VLAN list – add each VLAN separately - 10, 11, 12, 13, 14.