ELTEX WOP-12ac-LR, Быстрое руководство

Страница: 12 / 32

WOP-12ac-LR. Quick guide for FBWA configuration via web interface
12
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VAP – sequence number of the virtual access point;
Enabled – when checked, the virtual access point will be enabled, otherwise it is disabled;
VLAN ID – VLAN number to which the virtual access point is associated;
SSID – wireless network name;
Broadcast SSID – when checked, SSID broadcasting is on, otherwise it is disabled;
Station Isolation – when checked, station traffic isolation from each other within the same VAP is enabled;
VLAN trunk – when checked, the trunk port is used to connect the subscriber;
General Mode - when checked, General port will be used to connect client equipment - receiving and
transmitting tagged and untagged traffic;
General VLAN ID - VLAN number, which will be removed in the direction of the client equipment/into which
untagged traffic will be wrapped;
Security – wireless access security mode:
None – do not use encryption for data transfer. The access point is available for any subscriber to
connect;
WPA Personal – WPA and WPA2 authentication;
WPA Enterprise – certification mode of wireless devices, in which the client is authorized on a
centralized RADIUS server.
MAC Auth Type – authentication mode of clients by MAC address:
Disabled – do not use client authentication by MAC address;
RADIUS – use client authentication by MAC address using a RADIUS server;
Local – use client authentication by MAC address using the local address list generated on this
access point.
Radio1 VAP0 configuration example:
Radio – select value «1» ;
Enabled – set the flags for VAP 0;
SSID – enter the wireless network name «Eltex VAP» ;
Broadcast SSID – set the flag to enable broadcasting of the SSID name;
VLAN trunk – set the flag to use the trunk port when connecting the WB-1P-LR;
Station Isolation – set a flag to prohibit packet transfer between clients;
Security – select the WPA Personal network security mode. Enter the password «Eltex123» in the «Key»
field.
Click «Update» .
2.8 Enable WMF
In the «Wireless Multicast Forwarding» section multicast packet forwarding is configured:
Radio – selection of a radio module;