WOP-12ac-LR. Quick guide for FBWA configuration via web interface
22
•
•
•
•
•
•
•
•
•
•
•
•
In the
«WPA Key»
field, enter the key value
«Eltex123»
;
Select the
«Bridge»
operation mode;
In the
«Protocol»
field, select
«Static»
;
In the
«IP address»
field specify the IP address: 192.168.100.4;
In the
«Subnet mask»
field: 255.255.255.0;
In the
«Default gateway»
field:192.168.100.1;
In the
«Management VLAN ID»
field specify the VLAN ID: 10;
In the
«General VLAN ID»
field specify the VLAN ID: 10.
3.6 Access the device from an external network
Go ro rhe
«System»
submenu,
«Access»
tab. To get access to the device via external network set the following
permissions:
Web – External network:
HTTP – when checked, connection to the device web configurator through WAN port via HTTP is
enabled (insecure connection);
HTTPS – when checked, connection to the device web configurator through WAN port via HTTP is
enabled HTTPS (secure connection).
Telnet – External network:
Telnet – when checked, Telnet connection to the device through the WAN port is allowed.
SSH – External network:
SSH – when checked, SSH connection to the device through the WAN port is allowed.
To apply the new configuration, click the
«Apply»
button.
