WOP-12ac-LR. Quick guide for FBWA configuration via web interface
30
1.
2.
1.
2.
3.
•
•
•
•
Set the flag in the
«Use VLAN»
field;
In the
«VLAN ID»
field set the value
13
.
4.8 Local interfaces configuration
To bind local interfaces to the STB service, go to the
«Local Interfaces»
menu on the
«Functional Assignment»
tab. Assign one of the device ports to the STB port. After that, the STB should only be connected to this port:
4.9 VLAN management configuration
Go to the
«System»
menu on the
«Management Interface»
tab.
Set the flag
«Enable management interface»
.
Select the management traffic type in the
«Access Type»
field:
Untagged
– management traffic to the device comes in untagged form. In this case, the VLAN must be
configured for the Internet service;
Tagged
– a separate VLAN is used to control the device. If using the «Tagged» access type, in the «VLAN
ID» field, specify the VLAN number that will be used to control the device.
4. In the
«Protocol»
field select the protocol for assigning the address to the VoIP service interface:
Static
– operation mode, when IP address and other necessary parameters of WAN interface are set
statically;
DHCP
– operation mode where IP address, subnet mask, DNS address, default gateway and other
necessary settings for network operation are automatically obtained from DHCP server.
