WOP-12ac-LR. Quick guide for FBWA configuration via web interface
24
1.
2.
•
•
3. To start the update process, you must click the
«Upload file»
button. The process may take several
minutes (its current status will be shown on the page). The device will be automatically rebooted when the
update is completed.
4.3 «Internet» service configuration
Connect to the web interface (see Section
Connection to the RG-4402-G web interface
In the
«Internet»
settings, click on the link
«More»
:
3. In the connection settings in the
«Operation mode»
field select
«Router»
.
4. In the
«Protocol»
field, specify the type of protocol that is used to connect to the Internet. The following
protocols are available:
Static
– operation mode, when IP address and other necessary parameters of WAN interface are set
statically;
DHCP
– operation mode, when IP address, subnet mask, DNS server address, defualt gateway and other
parameters required for operation are obtained from DHCP server automatically;
Do not switch off or reboot the device during the firmware update.
