_________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-32M.IP 279
to call in the VoIP direction
1 – enable
pstn_numberprefix
prefix added to the number in CallerID.
String, 20 characters max.
or '''' – parameter is not defined
pstn_nameprefix
prefix added to the name in CallerID.
String, 20 characters max.
or ''—parameter is not defined
dont_detect_DT
detect or not the station answer signal
before dialing when a call is being routed
from IP to FXO.
0 – detect
1 – do not detect
fxo_delay_dialing
dialing delay if the detection of the 'Station
Response' signal is not used
enable_cpc
use a short-time break of the subscriber loop
on clearback from the opposite subscriber's
side
0 – disable
1 – enable
cpc_time
Duration of a short-time break of the
subscriber loop, ms
200-600
transmit_number
transmit the complete number received from
IP (from Request URI header of INVITE
request) into the line, including FXO unit
subscriber number
0 – disable
1 – enable
dont_transmit_prefix
transmit the complete number received from
IP (from Request URI header of INVITE
request) into the line, excluding FXO unit
subscriber number
0 – disable
1 – enable
fxo_call_busy
transmit a response of 503 instead of 486
when the line is busy
0 – transmit 486
1 – transmit 503
dialing
line dialing type
pulse
DTMF
min_level_detect
minimum level of detected signals, dBm
20-40
dial_tone_detect
dial tone detection parameters
X;Z(A/B/1) or X;Z(A/B/1);nc
X,Y;Z(A/B/1) or X,Y;Z(A/B/1);nc
X,Y;Z(A/B/1+2) or X,Y;Z(A/B/1+2);nc
X,Y;Z(A/B/2) or X,Y;Z(A/B/2);nc
For more information see Section
5.1.2.4
rb_tone_detect
Ringback tone detection parameters
X;Z(A/B/1) or X;Z(A/B/1);nc
X,Y;Z(A/B/1) or X,Y;Z(A/B/1);nc
X,Y;Z(A/B/1+2) or X,Y;Z(A/B/1+2);nc
X,Y;Z(A/B/2) or X,Y;Z(A/B/2);nc
For more information see Section
5.1.2.4
busy_tone_detect
busy tone detection parameters
X;Z(A/B/1) or X;Z(A/B/1);nc
X,Y;Z(A/B/1) or X,Y;Z(A/B/1);nc
X,Y;Z(A/B/1+2) or X,Y;Z(A/B/1+2);nc
X,Y;Z(A/B/2) or X,Y;Z(A/B/2);nc
For more information see Section
5.1.2.4
disconnect_tone_detect
disconnect tone detection parameters
X;Z(A/B/1) or X;Z(A/B/1);nc
X,Y;Z(A/B/1) or X,Y;Z(A/B/1);nc
X,Y;Z(A/B/1+2) or X,Y;Z(A/B/1+2);nc
X,Y;Z(A/B/2) or X,Y;Z(A/B/2);nc
For more information see Section
5.1.2.4
fxodeltdm
interdigit interval when dialing a telephone
line, ms
100-1000