ELTEX TAU-32M.IP, Руководство по эксплуатации, Страница: 108 / 334

_________________________________________________________________________________
_________________________________________________________________________________
108 Universal Network Terminal TAU-32M.IP

w – pause symbol for pulse dialing, equal to 0.5 seconds (supported on FXO ports of the TAU-32m.IP
gateway manufactured by Eltex). It is allowed to indicate up to 10 characters of a pause in a row,
which is equivalent to a pause of 5 seconds, if one character is regarded as 0.5 seconds. Designed to
interact with a gateway that has FXO ports and allows you to transfer the length of a pause for
dialing to the opposite side. If the interacting party supports the processing of w symbols, then
upon receipt of a request containing these symbols, it will withstand a pause (by the number of w
symbols) in the FXO line when dialing by the pulse method.

'S', 'T'
–
short (S) or long (T) timers are used in rules containing special repetition characters
'{min,max}', '.', or '+' and are specified right after them. They define, which timer will work for the
current rule when it is already possible to perform the the routing for the dialed number. If the
timer is not specified, S-timer will be used by default. Allows to replace S-timer with L-timer in the
current rule;
Optional part of the rule (may be skipped)

host:port
–
routing to IP address. Usage of a port is effective for SIP protocol only. If @host:port is
not specified, calls will be routed via SIP-proxy or H.323 gatekeeper.
Example:
1xxxx@192.168.16.13:5062 – all five-digit dials, beginning with 1, will be routed to IP address
192.168.16.13 to port 5062

{pickup:x,xx}
–
pickup group code dialling. You may specify multiple pickup groups using comma.
Example:
*8@{pickup:1} – '*8' code is used for the first pickup group

{local} –routing inside the gateway to a local IP address. Must be used for internal routing, when the
device receives its network settings dynamically (via DHCP protocol).
Additional parameters
Format: (param1: value1, .., valueN; .. ;paramN: value1, .., valueN)

param
–
parameter name, several parameters are separated with a semicolon, all parameters are
placed in common round brackets;

value
–
parameter value, multiple values of one parameter are separated with a comma.
Valid parameters and their values
–
codecs parameter
–
determines the list of codecs that will be used when making an outgoing call under the
routing rule. May take the following values: g711a, g711u, g723, g729x, g729b, g726_32.
Example: (codecs: g711a, g711u).
Note in the given rule g729a codec is recorded as g729x;
–
profile parameter
–
determines the 'routing profile' with the parameters of which the call will be made (see
Section 0