_________________________________________________________________________________
_________________________________________________________________________________
112
Universal Network Terminal TAU-32M.IP
24 (0x18)
IPP3 (Flash)
32 (0x20)
IPP4 (Flash Override)
40 (0x28)
IPP5 (Critical)
48 (0x30)
IPP6 (Internetwork Control)
56 (0x38)
IPP7 (Network Control)
To discard all changes made to configuration, click the
Undo All Changes button.
To set default parameters,
click the
Defaults
button (the figure below shows default values). To apply changes, click the
Submit Changes
button.
5.1.2.4
The Ports Configuration of Subscriber Ports submenu (Ports)
In the
'Ports'
submenu, you may configure subscriber ports of the device.
You may use up to 8 subscriber profiles to configure the following port settings:
CallerID
mode, Flash impulse duration, signal levels strengthening/weakening, priority between CFB
and CW services, 'Music on hold' service, payphone mode.
In
'Subscriber profile'
item of the
'Custom' tab, you may assign one of the configured subscriber profiles to each port.
Profile
1 is assigned for all ports by default. To open the subscriber profile configuration window,
click
'Subscriber profiles'
in
'PBX/Ports' tab.
If you have to configure a custom value for any
of the parameters listed above, you have to configure it in
'PBX/Ports'
menu by clicking
'Edit
/Common' button. To use custom settings, it is absolutely necessary to select
'Custom' checkbox (in
'PBX/Ports'
tab – 'Edit
/Custom' or
'PBX/Ports'
) in the port
configuration!
You don't have to reboot the gateway in order to apply port settings. Changing
'SIP port'
parameter will lead to termination of current calls. Changing other parameters will not
disrupt any of the established connections!
Configuration of ports
Port settings table (tabs '1-8', '9-16', '17-24', '25-32'):
–
Port
–port number;
–
Phone –
subscriber's number;
–
Display name–
subscriber's name;