ELTEX TAU-32M.IP, Руководство по эксплуатации, Страница: 116 / 334

_________________________________________________________________________________
_________________________________________________________________________________
116 Universal Network Terminal TAU-32M.IP
When setting the operating mode, two methods are available: «DTMF» and «pulse». Depending on the value
of the 'PSTN Activity' parameter, you can separately configure dialing methods in the pre-response state and the
conversation state:
Profile 1
–
CallerID –select the Caller ID mode from the drop-down list. For Caller ID operation, subscriber's phone unit
must support the selected method.

Off – Caller ID is disabled;

Aon_rus – 'Russian Caller ID' method. The number is served when subscriber's phone unit lifts the
headset with its 500Hz frequency request;

Dtmf –DTMF Caller ID method. The number is served between the first and second calls on the line
by dual-frequency DTMF impulses;

Fsk_bell202, Fsk_v23 –FSK Caller ID method (using bell202 standard, or ITU-T V.23). The number is
served between the first and second calls on the line by a stream of data with a frequency
modulation;
To enable Caller ID information reception, connected phone unit should support
the configured Caller ID method.
In Fsk_bell202, Fsk_v23 modes, Caller ID information is sent in MDMF format:
time/date, subscriber's number and name.
–
Hide date –when checked, in Fsk_bell202, Fsk_v23 modes, Caller ID information will be sent without time
and date;