_________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-32M.IP 137
–
PickUp group
–pickup group sequential number [1 .. 32];
–
Edit ports
–edit pickup group parameters. To edit pickup group parameters, click icon
in the
corresponding row:
–
Port
– subscriber port number;
Enable
–when checked, the port belongs to the pickup group; otherwise, it does not belong to this group. To
set permissions for all subscriber ports, click the
Enable all
button. To deselect checkboxes for all subscriber ports,
click the
Disable all
button.
If you need to add a port into multiple groups at once, use 'PBX/Ports/
Edit port
/PickUp'
menu.
To quit the pickup group configuration dialog without saving, click the
Cancel button.
To save changes, click
the
Submit Changes
button. To store changes to non-volatile memory of the device, click the
Save
button.
Service usage:
The call comes in to the phone unit of a subscriber that belongs to the pickup group. If the subscriber is
unavailable or cannot answer the call for some reason, another subscriber that belongs to that group may answer
the incoming call. To do this, they should pick up the phone and dial a pickup code, and the connection with the
caller will be established after that.
Pickup group may be used in combination with a call group; in this case, all ports that belong to a call group