MES1000, MES2000 Ethernet Switches
197
Privileged EXEC Mode Commands
Command line in the Privileged EXEC mode appears as follows:
console#
Table 5.240—ACL display commands
Command
Value
Action
show access-lists
[
access-list
]
(0..32) characters
Displays ACLs created on a switch.
show access-lists
time-range-active
[
access-list
]
Displays currently active ACLs created on a switch.
show interfaces access-lists
[gigabitethernet
gi_port
|
fastethernet
fa_port
| port-
channel
group
|
vlan
vlan_id
]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
vlan_id: (1..4094);
group: (1..8)
Displays ACLs assigned to interfaces.
clear access-lists counters
[gigabitethernet
gi_port
|
fastethernet
fa_port
| port-
channel
group
]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Resets all ACL counters or ACL counters for the specified
interface.
show interfaces access-lists
counters
[gigabitethernet
gi_port
|
fastethernet
fa_port
| port-
channel
group
]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Displays ACL counters.
EXEC Mode Commands
Command line in the EXEC mode appears as follows:
console#
Table 5.241
—
ACL display commands
Command
Value
Action
show time-range
range_name
range_name:
1..32
characters
Show the time period configuration
5.31.1
IPv4 ACL Configuration
The section provides values and description of main parameters which are used in IPv4 ACL
configuration commands. In order to create an IPv4 ACL and enter its configuration mode, use the
following command:
ip access-list extended
access-list
. For example, to create the
EltexAL
ACL, the following commands should be executed:
console#
console#
configure
console(config)#
ip access-list extended
EltexAL
console(config-ip-al)#
Table 5.242
—
Main parameters of commands
Parameter
Value
Action
permit
Permit
Creates a permitting filtration rule in ACL.
deny
Deny
Creates a denying filtration rule in ACL.
