46
MES1000, MES2000 Ethernet Switches
port-channel
group
}] |
name
macro-name
]
macro-name:
(1..32) characters
Interface configuration mode commands
Command line request in interface configuration mode appears as follows:
console(config-if)#
Table 5.9 —Interface configuration mode commands
Command
Action
macro apply
word
(1..32) characters
Apply the selected macro.
macro trace
word
(1..32) characters
Validate the selected macro.
macro description
word
(1..160) characters
Specify macro descriptor string.
no macro description
Delete the descriptor string.
5.5
System management commands
EXEC mode commands
Command line request in EXEC mode appears as follows:
console>
Table 5.10 —System management commands in EXEC mode
Command
Value/Default value
Action
ping [ip]
{A.B.C.D|
host
} [
size
size
]
[
count
count
] [
timeout
timeout
]
host (1..158) symbols;
size (64..1518)/64 Byte;
count (0..65535)/4;
timeout (50..65535) /2000
ms
This command is used for transmission of ICMP requests (ICMP
Echo-Request) to the specified network node, and for reply
management (ICMP Echo-Reply).
- A.B.C.D—IPv4 address of the network node
- host—domain name of the network node
- size—size of the packet to be sent, the quantity of bytes in a
packet
- count—quantity of packets to be sent
- timeout—timeout of the request
ping ipv6
{A.B.C.D.E.F|
host
}
[
size
size
]
[
count
count
] [
timeout
timeout
]
host (1..158) symbols;
size (68..1518)/68 Byte;
count (0..65535)/4;
timeout (50..65535) /2000
ms
This command is used for transmission of ICMP requests (ICMP
Echo-Request) to the specified network node, and for reply
management (ICMP Echo-Reply).
- A.B.C.D.E.F—IPv6 address of the network node
- host—domain name of the network node
- size—size of the packet to be sent, the quantity of bytes in a
packet
- count—quantity of packets to be sent
- timeout—timeout of the request
traceroute ip {
A.B.C.D |host
}
[size
size
]
[ttl
ttl
]
[count
count
] [timeout
timeout
] [source
ip_address
]
[tos
tos
]
host (1..158) symbols;
size (64..1518)/64 Byte;
ttl (1..255)/30;
count (1..10)/3;
timeout (1..60) /3 с;
tos(0..255)/0
Detection of the traffic route to the destination node. -
A.B.C.D—IPv4 address of the network node
- host—domain name of the network node
- size—size of the packet to be sent, the quantity of bytes in a
packet
- ttl—maximum quantity of route portions
- count—maximum quantity of packet transmission attempts
for each portion
- timeout—timeout of the request
- ip_address —switch interface IP address, used for packet
transmission
- tos—type of service sent in the IP protocol header.
For description of errors, occurring during the
execution of commands, see tables 5.12, 5.13
