ELTEX MES1000 Скачать руководство пользователя

Страница: 178 / 231

178

MES1000, MES2000 Ethernet Switches

Ethernet interface configuration mode commands

Command line request in Ethernet interface configuration mode appears as follows:

console(config-if)#

Table 5.205 —Ethernet interface configuration mode commands

Command

Value/Default value

Action

dot1x host-mode
{multi-host | single-host |
multi-sessions}

-/ multi-host

Allow the presence of single/multiple clients on the authorized
802.1X port.
-

multi-host

—multiple clients

single-host

—single client

multi-sessions

—multiple sessions

dot1x violation-mode

{

restrict | protect |

shutdown

}

-/protect

Define the action that should be performed when the device
with MAC address, that differs from the client's MAC address,
attempts to access the interface.

- restrict—

packets with MAC address, that differs from the

client's MAC address, are forwarded; the source address
learning is not performed

protect

—packets with MAC address, that differs from the

client's MAC address, are dropped
-

shutdown

—port is disabled; packets with MAC address, that

differs from the client's MAC address, are dropped
SNMP trap message generation frequency, when unauthorized

packets arrive, equals to 1 second.

The command is ignored in the multiple hosts mode.

no dot1x
single-host-violation

Restore the default value.

dot1x guest-vlan enable

-/access denied

Allow unauthorized users of this interface to access the guest
VLAN.

The device should have at least one guest VLAN
authorized (dot1x guest-vlan command in VLAN

interface settings).

no dot1x guest-vlan enable

Deny unauthorized users of this interface to access the guest
VLAN.

dot1x mac-authentication

{

mac-only

mac-and-802.1x

}

-/disabled

Enable authentication based on the user MAC addresses.
-

mac-only

—enable authentication based on MAC addresses

only, 802.1х packets are ignored
-

mac-and-802.1x

—enable authentication based on 802.1х

and MAC addresses

Guest

VLAN

should

enabled,

when

authentication based on МАС address is used.

- There should be no static MAC address bindings.
- Re-authentication function should be enabled.

no dot1x mac-
authentication

Disable authentication based on the user MAC addresses.

dot1x radius-attributes
filter-id

-/disabled

Enable authentication based on ACL/assign QoS-Policy.

no dot1x radius-attributes
filter-id

Restore the default value.

dot1x radius-attributes
vlan

-/disabled

Enables Tunnel-Private-Group-ID (81) option processing in
RADIUS server messages.

no dot1x radius-attributes
vlan

Disables Tunnel-Private-Group-ID (81) option processing in
RADIUS server messages.

VLAN configuration mode commands

Command line request in VLAN interface configuration mode appears as follows:

console(config-if)#

Содержание MES1000








































































































































































































































Результаты поиска

Содержание MES1000

Отзывы:

Похожие инструкции для MES1000

Бренды по названию

Популярные бренды

ELTEX MES1000, Руководство по эксплуатации

Результаты поиска

Содержание MES1000

Отзывы:

Похожие инструкции для MES1000

Бренды по названию

Популярные бренды