ELTEX MES1000 Скачать руководство пользователя

Страница: 121 / 231

MES1000, MES2000 Ethernet Switches

121

vlan_id

static

ip_address

[interface
{ gigabitethernet

gi_port

fastethernet

fa_port

|port-

channel

group

}]

gi_port: (1..3/0/1..28);

fa_port: (1..3/0/1..24);

group: (1..8)

and statically add group interfaces for the current VLAN.
-

ip_ address

—multicast IP address

Interface listing should be delimited with '–' and ','.

no ip igmp snooping vlan

vlan_id

static

ip_address

[interface
{ gigabitethernet

gi_port

fastethernet

fa_port

|port-

channel

group

}]

Remove multicast IP address from the table.

ip igmp snooping vlan

vlan_id

mrouter learn

pim-dvmrp

vlan_id: (1-4094)

Enabled by default.

Enable automatic port identification with connected multicast
routers for the current VLAN group.

no ip igmp snooping vlan

vlan_id

mrouter learn

pim-dvmrp

Disable automatic port identification with connected multicast
routers for the current VLAN group.

ip igmp snooping vlan

vlan_id

mrouter interface {

gigabitethernet

gi_port

fastethernet

fa_port

|port-

channel

group

}

vlan_id: (1-4094)

gi_port: (1..3/0/1..28);

fa_port: (1..3/0/1..24);

group: (1..8)

Define the port with connected multicast router for the
selected VLAN.

no ip igmp snooping vlan

vlan_id

mrouter interface {

gigabitethernet

gi_port

fastethernet

fa_port

|port-

channel

group

}

Multicast router is not connected to the port.

ip igmp snooping vlan

vlan_id

forbidden

mrouter

interface
{ gigabitethernet

gi_port

fastethernet

fa_port

|port-

channel

group

}

vlan_id: (1-4094)

gi_port: (1..3/0/1..28);

fa_port: (1..3/0/1..24);

group: (1..8)

Do not identify the port (static, dynamic) as a port with
connected multicast router.

no ip igmp snooping vlan

vlan_id

forbidden mrouter

interface
{ gigabitethernet

gi_port

fastethernet

fa_port

|port-

channel

group

}

Identify the port as a port with connected multicast router.

ip igmp snooping vlan

vlan_id

replace source-ip

ip_address

vlan_id: (1..4094)

Replaces source IP address with specified IP address in all
IGMP report packets of the specified

VLAN

no ip igmp snooping vlan

vlan_id

replace source-ip

Disables replacement of source IP address with specified IP
address in all IGMP report packets of the specified

VLAN

ip igmp snooping map cpe
vlan

cpe_vlan_id

multicast-tv vlan

mc_vlan_id

cpe_vlan_id: {1..4094};

mc_vlan_id: {1..4094}

Add the match between the user VLAN (cpe_vlan_id) and the
multicast VLAN (mc_vlan_id).
If IGMP message comes to a port with cpe_vlan_id tag and the
'cpe_vlan_id / mc_vlan_id' match exists, IGMP message will be
retranslated to the mc_vlan_id.

no ip igmp snooping map
cpe vlan

cpe

vlan_id

Disable the Multicast-TV VLAN mode for the specific VLAN.

ip igmp snooping
vlan

vlan_id

querier

vlan_id: (1..4094)

Enable igmp-query generation by the switch in the current
VLAN.
By default, the query generation is disabled.

no ip igmp snooping
vlan

vlan_id

querier

Restore the default value.

ip igmp snooping
vlan

vlan_id

querier

version

{

}

vlan_id: (1..4094)

Set IGMP version for IGMP query generation.

no ip igmp snooping vlan

vlan_id

querier version

Restore the default value.

ip igmp snooping vlan

vlan_id

querier address

vlan_id: (1..4094)

Define the source IP address for IGMP querier.

Содержание MES1000








































































































































































































































Результаты поиска

Содержание MES1000

Отзывы:

Похожие инструкции для MES1000

Бренды по названию

Популярные бренды

ELTEX MES1000, Руководство по эксплуатации

Результаты поиска

Содержание MES1000

Отзывы:

Похожие инструкции для MES1000

Бренды по названию

Популярные бренды