ELTEX MES1000 Скачать руководство пользователя

Страница: 117 / 231

MES1000, MES2000 Ethernet Switches

117

port-channel

group

}]

no bridge multicast ipv6 ip-
address

ip_multicast_address

Remove multicast IP address from the table.

bridge multicast ipv6
forbidden ip-address

ipv6_multicast_address

{add | remove}
{ gigabitethernet

gi_port

fastethernet

fa_port

port-channel

group

}

gi_port: (1..3/0/1..28);

fa_port: (1..3/0/1..24);

group: (1..8)

Disable the connection for configured port(s) to multicast IPv6
address.
-

ipv6_multicast_address

—multicast IP address

- add

—add port(s) into the banned list

- remove

—remove port(s) from the banned list

Interface listing should be delimited with '–' and ','.

no bridge multicast ipv6
forbidden ip-address

ipv6_multicast_address

Restore the default value.

bridge multicast ipv6
source

ipv6_address

group

ipv6_multicast_address

[[add | remove]
{gigabitethernet

gi_port

fastethernet

fa_port

port-channel

group

}]

gi_port: (1..3/0/1..28);

fa_port: (1..3/0/1..24);

group: (1..8)

Set the match between the user IPv6 address and multicast
address in the multicast addressing table and statically
add/remove interfaces to/from the group.
-

ipv6_address

—source IP address

ipv6_multicast_address

—multicast IP address

add

—add ports to the source IP address group

- remove

—remove ports from the source IP address group

no bridge multicast ipv6
source

ipv6_address

group

ipv6_multicast_address

Restore the default value.

bridge multicast ipv6
forbidden source

ipv6_address

group

ipv6_multicast_address

{add | remove}
{ gigabitethernet

gi_port

fastethernet

fa_port

port-channel

group

}

gi_port: (1..3/0/1..28);

fa_port: (1..3/0/1..24);

group: (1..8)

Disable adding/removal of matches between the user IPv6
address and the multicast address in the multicast addressing
table for the specific port.

- ipv6_address

—source IPv6 address

- ipv6_multicast_address

—multicast IPv6 address

- add

—disable port adding to the source IPv6 address group

remove

—disable port removal from the source IPv6 address

group

no bridge multicast ipv6
forbidden source

ipv6_address

group

ipv6_multicast_address

Restore the default value.

Ethernet interface configuration mode commands (interface range), port group interface

Command line request in Ethernet interface, port group interface configuration mode appears as

follows:

console#

configure

console(config)#

interface

{

ethernet

port

port-channel

group

}

console(config-if)#

Table 5.116 —Ethernet interface configuration mode commands, interface group

Command

Value/Default value

Description

bridge multicast
unregistered

{

forwarding

filtering

}

-/forwarding

Set the forwarding rule for packets received from unregistered
multicast addresses.
-

forwarding

—forward unregistered multicast packets

filtering

—filter unregistered multicast packets

no bridge multicast
unregistered

Restore the default value.

Global configuration mode commands

Command line request in global configuration mode appears as follows:

console(config)#

Содержание MES1000








































































































































































































































Результаты поиска

Содержание MES1000

Отзывы:

Похожие инструкции для MES1000

Бренды по названию

Популярные бренды

ELTEX MES1000, Руководство по эксплуатации

Результаты поиска

Содержание MES1000

Отзывы:

Похожие инструкции для MES1000

Бренды по названию

Популярные бренды