150
MES1000, MES2000 Ethernet Switches
Table 5.165 —Global configuration mode commands
Command
Action
line {console|telnet|ssh}
Enter the mode of the corresponding terminal (local console, remote console—Telnet or
secure remote console—SSH).
Terminal configuration mode commands
Command line request in terminal configuration mode appears as follows
console#
configure
console(config)#
line
{
console
|
telnet
|
ssh
}
console(config-line)#
Table 5.166 —Terminal configuration mode commands
Command
Value|Default value
Action
speed
bps
2400, 9600, 19200, 38400,
57600, 115200/115200
baud
Define the local console access rate (the command is available
only in local console configuration mode).
no speed
Restore the default value.
autobaud
-
Enable the automatic detection of the local console access
rate (the command is available only in local console
configuration mode).
no autobaud
Disable the automatic detection of the local console access
rate.
exec-timeout
minutes
[
seconds
]
minutes:
(0..65535)
minutes
seconds:
(0..59) seconds/
10 minutes
Define the interval when the system waits for user input. If the
user doesn't input anything during this interval, the console
turns off.
no exec-timeout
Restore the default value.
EXEC mode commands
Command line request in EXEC mode appears as follows:
console#
Table 5.167 —EXEC mode commands
Command
Action
show line
[console
|
telnet
|
ssh
]
Show the terminal parameters.
