ELTEX ESR Series, Руководство пользователя

Страница: 83 / 575

ESR-Series. User manual
83
•
•
Configuration example for obtaining dynamic IP address from DHCP server on Gigabit Ethernet 1/0/10
interface:
esr# configure
esr(config)#
interface gigabitethernet 1 / 0 / 10
esr(config- if )# ip address dhcp
esr(config- if )# exit
To ensure the correct IP address assigning for the interface, enter the following command when the
configuration is applied:
esr# show ip interfaces
IP address Interface Type
------------------- --------------------------------- -------
192.168 . 11.5 / 25 gigabitethernet 1 / 0 / 10 DHCP
Configuring remote connection to router
In the factory configuration, remote access to the router may be established via Telnet or SSH from the
'trusted' zone. To enable remote access to the router from other zones, e.g. from the public network, you
should create the respective rules in the firewall.
When configuring access to the router, rules should be created for the following pair of zones:
source-zone – zone that the remote access will originate from;
self – zone which includes router management interface.