ESR-Series. User manual
447
•
•
Step
Description
Command
Keys
11
Set the amount of GratuituousARP
messages that will be sent when
switching the router to the Master
status (optionally).
esr(config-if-gi)# vrrp timers garp
repeat <COUNT>
<COUNT> – amount of
messages, takes values of
[1..60].
Default value: 5.
12
Set the interval after which
GratuituousARP messages will be sent
periodically while the router is in the
Master status (optionally).
esr(config-if-gi)# vrrp timers garp
refresh <TIME>
<TIME> – time in seconds,
takes values of [1..65535].
Default value: Periodic sending
is disabled.
13
Set the amount of GratuituousARP
messages that will be sent with the
garprefresh period while the router is in
the Master status (optionally).
esr(config-if-gi)# vrrp timers garp
refresh-repeat <COUNT>
<COUNT> – amount of
messages, takes values of
[1..60].
Default value: 1.
14
Specify whether the higher priority
Backup router would try to take the
Master role from the current lower
priority Master router (optionally).
esr(config-if-gi)# vrrp preemption
disable
esr(config-if-gi)# ipv6 vrrp
preemption disable
15
Set the time interval after which the
higher priority Backup route will try to
take the Master role from the current
lower priority Master router (optionally).
esr(config-if-gi)# vrrp preemption
delay <TIME>
<TIME> – timeout, takes value
in seconds [1..1000].
Default value: 0
esr(config-if-gi)# ipv6 vrrp
preemption delay <TIME>
16
Set the password for neighbour
authentication (optionally).
esr(config-if-gi)# vrrp
authentication key ascii-text
{ <CLEAR-TEXT> | encrypted
<ENCRYPTED-TEXT> }
<CLEAR-TEXT> – password,
set by the string of 8 to 16
characters;
<ENCRYPTED-TEXT> –
encrypted password of 8 to 16
bytes (from 16 to 32
characters) in hexadecimal
format (0xYYYY ...) or
(YYYY ...).
17
Specify authentication algorithm
(optionally).
esr(config-if-gi)# vrrp
authentication algorithm
<ALGORITHM>
<ALGORITHM> –
authentication algorithm:
cleartext
– password,
transmitted in clear text;
md5
– password is
hashed by md5
algorithm.
Содержание ESR Series
