ELTEX ESR Series, Руководство пользователя

Страница: 290 / 575

ESR-Series. User manual
290
•
•
•
•
•
•
•
S
t
e
p Description Command Keys
1
9 Add subnets filtration in incoming
or outgoing updates (optionally). esr(config-isis)# prefix-list
{ ipv6 <LIST_NAME> |
<LIST_NAME> } {in|out}
<LIST-NAME> – name of a subnet list being
configured, set by the string of up to 31
characters.
in – incoming routes filtration;
out – advertised routes filtration.
2
0 Add subnets filtration in incoming
or outgoing updates (optionally). esr(config-isis)# route-map
<NAME> {in|out} <NAME> – name of the route map that will be
used for advertised routes filtration and
modification, set by the string of up to 31
characters.
2
1 Set a matching of interface to a
specified IS-IS process. esr(config-if-gi)# isis instance
<ID> <ID> – process number, takes values of
[1..65535].
2
2 Enable the IS-IS protocol on the
interface. esr(config-if-gi)# isis enable
2
3 Enable the use of TLV#8 in hello
packets (optional). esr(config-if-gi)# isis hello-
padding
2
4 Set the priority when selecting DIS
(optional). esr(config-if-gi)# isis priority
<VALUE> [<LEVEL>] <VALUE> – number, may take values [0..127];
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level 2.
2
5 Set the metric value for the
interface (optional). esr(config-if-gi)# isis metric
<VALUE> [<LEVEL>] <VALUE> – number, may take values
[1..16777215];
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level 2.
2
6 Set defines which routing layer on
the interface the current IS-IS
process will run on (optional). esr(config-if-gi)# isis circuit-
type {<LEVEL>} <LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-1-2 – operate on levels 2 and 2;
level-2-only – operate only on level 2.