ELTEX ESR Series, Руководство пользователя

Страница: 569 / 575

ESR-Series. User manual
569
•
•
•
1.
•
2.
•
3.
•
4.
•
•
5.
•
•
•
•
•
•
«+» – repeating the previous character from 1 to infinity number of times.
{a,b} – repeating the previous character from a to b times;
{a,} – repeating the previous character equal to or more than a times;
{,b} – repeating the previous character equal to or less than b times.
Example: (810X.) - international number with any digits amount.
Settings influencing on the dial plan processing:
Interdigit Long Timer (letter “L” in dial plan entry) – timeout to enter the next digit if there are no
templates matching the dialled combination;
Interdigit Short Timer (letter “S” in dial plan entry) – timeout to enter the next digit if at least one pattern
completely matches the dialled combination and there is at least one more pattern before matching with
that it is necessary to perform the extension dialling.
Additional features:
Replacement of a dialled sequence
Syntax: <arg1:arg2>
This feature allows to replace a dialled sequence to any sequence of dialled characters. In this case, the
second argument must be specified with a certain value, both arguments may be empty.
Example: (<83812:> XXXXXX) — this record will comply to dialed digits 83812, but this sequence
will ommited and will not be transmitted to SIP server.
Insert a tone in the set
For long-distance access (for city access in case of office PBX), it is common to hear a ringback, that
may be implemented by inserting comma in a sequence of digits.
Example: (8, 770) - after digit 8 a continious tone will output when dialing number 8770.
Number dialling restriction
If at the end of pattern add symbol '!' the dialling of numbers corresponding to the template will be
blocked.
Example: (8 10X xxxxxxx ! | 8 xxx xxxxxxx ) - expression allows dialling only intercity numbers and
exclude international calls.
Replacement of number dialling timers values
Timers values can be assigned both to a whole dial plan and to a certain template. 'S' is responsible for
the
«Interdigit Short Timer» setup and 'L' – for the «Interdigit Long Timer» Timers values can be specified
for all templates in a dial plan if the values are listed before the opening parenthesis.
Example: S4 (8XXX.) or S4,L8 (XXX)
If these values are listed in one sequence only, they are effective only for this sequence. Also, in
this case it is not necessary to put a colon between the key and the timeout value, the value can be
located anywhere in the template.
Example: (S4 8XXX. | XXX)
или ([1-5] XX S0) - entry will call instant call transmission when three-
digit number starting at 1, 2, ..., 5 is dialed.
Dialling via direct address (IP Dialing)
“@” character put after the number means that the address of the server, to which the dialled number
call will be sent, will be specified. We recommend to use 'IP Dialling' and receive and transmission of call
without registration ('Call Without Reg', 'Answer Without Reg' ). This can help in case of server failure.
In addition, the format of address with IP Dialing can be used in numbers intended to forward calls.
Example 1: ( 8 xxx xxxxxxx ) – 11-digit number, starting with 8.
Example 2: ( 8 xxx xxxxxxx | <:8495> xxxxxxx ) – 11-digit number, starting with 8; if 7-digit number
was entered, add 8495 to the number being transmitted.
Example 3: (0[123] | 8 [2-9]xx [2-9]xxxxxx) – emergency service numbers dialling as well as
unusual dialling of long-distance call numbers.
Example 4: (S0 <:82125551234>) – specified number speed dial, «Hotline» mode analogue on
another gateways.
Example 5: (S5 <:1000> | xxxx) – the given dial plan allows to dial any number consisting of digits;
if nothing is entered during 5 seconds, call number 1000 (let it be a secretary).
Example 6: (8, 10x.|1xx@10.110.60.51:5060) – the given dial plan allows to dial numbers starting
with 810 and containing at least one digit after “810”. After entering 8, the “station response”