Elsner Sewi KNX TH-L-Pr Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 77

Elsner Sewi KNX TH-L-Pr Скачать руководство пользователя страница 33

32

Parameter setting

Sensor Sewi KNX TH-L-Pr

• Version: 17.11.2016 • Technical changes and errors excepted.

The slave can be

blocked

via the bus.

6.3.1. Master 1/2/3/4

If the device is set as a master, the additional master settings 1 to 4 will appear. This
enables the

Sensor Sewi KNX TH-L-Pr

to perform four different control functions for

motion detection. Activate the master in order to use it.

Set, in which cases

threshold values and delay times

received via object are to be

retained. The parameter is only taken into consideration if the setting via object is ac-
tivated below. Please note that the setting "After power supply restoration and pro-
gramming" should not be used for the initial start-up, as the factory settings are always
used until the 1st communication (setting via objects is ignored).

Select, whether motion is to be detected

constantly or brightness dependent

.

Settings for brightness dependent motion detection:

The

brightness dependent motion detection

can be used via separate threshold

values for switch-on and switch-off or dependent on daylight. The separate threshold
values are ideal for controlling the light in rooms which are only illuminated by artifi-
cial light. The daylight dependent control is ideal for rooms with daylight and artificial
light.

For

daylight dependent motion detection with separate switch-on and

switch-off threshold values

activate, as required, the objects for setting the th-

reshold values. Then specify the switch-on and switch-off values (brightness range).
The switch-on value is the value, below which the room should be lit in the event of

Use block

No •

Yes

Analysis of the blocking object

• at value 1: block | at value 0: release
• at value 0: block | at value 1: release

Value prior to first communication

0 • 1

Use master 1/2/3/4

No • Yes

Maintain the

threshold values and delays received
via communication objects

• never
• after power supply restoration
• after power supply restoration and
programming

Motion detection

constantly • brightness dependent

Motion detection

brightness dependent

Type of brightness dependency

• separate switch-on and switch-off values
• daylight dependent

«
...
31
32
33
34
35
...
»

Содержание Sewi KNX TH-L-Pr














































































Отзывы:

Нет отзывов