manualshive.com logo in svg

elsner elektronik 70550, Установка и настройка, Страница: 3 / 52

Поделиться
Скачать
elsner elektronik 70550 Скачать руководство пользователя страница 3

1

Contents

Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany

Actuator KNX S1R-B4 compact

 • from application 1.0

Status: 12.09.2022 • Subject to technical changes. Errors excepted.

1.

Safety and usage instructions  .............................................................  3

1.1. Safety notice for automatic functions  ....................................................................  3

2.

Description ...........................................................................................  4

3.

Commissioning ....................................................................................  4

3.1. Addressing of the device at the bus  .......................................................................  5
3.2. Monitor safety functions ..........................................................................................  5

4.

Transfer protocol  .................................................................................  6

4.1. List of all communication objects  ...........................................................................  6

5.

Parameter setting  ..............................................................................  14

5.1. General settings  .....................................................................................................  14
5.2. Output .....................................................................................................................   14

5.2.1. Channel settings – drives  ...........................................................................  15

5.2.1.1.  Control (drives)  ............................................................................  17
5.2.1.2. Manual ...........................................................................................  25
5.2.1.3. Automation - external  ..................................................................  25
5.2.1.4. Automatic - internal for shading (drives) ....................................  26
5.2.1.5. Automatic for windows (drives)  ..................................................  31
5.2.1.6. Scenes (drives) ..............................................................................  35
5.2.1.7. Button inputs (drives)  ...................................................................  35

5.2.2. Connection option for zero position sensors  ...........................................  42
5.2.3. Channel settings – switch functions ..........................................................  44

5.2.3.1. Connection (switch functions)  .....................................................  45
5.2.3.2. On/Off switch delays, time switching (switch functions)  ..........  45
5.2.3.3. Blocking function (switch functions)  ...........................................  46
5.2.3.4. Button input (switch functions)  ...................................................  46

Содержание 70550





















































Отзывы:

Нет отзывов