elsner elektronik 70550, Установка и настройка

Страница: 29 / 52

27 Parameter setting
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
16 bit input object:
Indoor temperature release:
The input object "indoor temperature release" is linked with the output object of a
temperature sensor. The input object can be a 1bit object (smaller or larger than a
threshold value), as well as a 16bit object (measurement value or target and actual
value).
16 bit input object:
16 bit input object (target/actual temperature):
For this function the target value and actual value (measurement values) are imported
from the 16bit object and evaluated.
Shading is allowed if the measurement value is greater than or equal to the target
value+difference
and blocked if the measurement value is smaller than the target value+hysteresis
difference.
Automatic shading:
The automatic shading evaluates the input objects "brightness" and "position of the
sun" of a weather station. The moving position for the automatic shading is specified
here as well.
Use twilight/time control only twilight control / both
Type of twilight object 1 bit • 16 bit
Type of twilight object 16 bit
Twilight threshold value in lux 1 … 1000; 10
Switching delay 1 minute
Send current twilight status no • yes
Use inside temperature release no • yes
Type of input object 1 bit • 16 bit • 16 bit target/actual
temperature
Type of input object 16 bit
Threshold value in 0.1°C -300 … 800; 200
Hysteresis in 0.1°C 1 … 100; 20
Send current blocking status no • yes
Type of input object 16 bit target/actual temperature
Target value (SW) – actual value (MW)
Difference in 0.1°C 1 … 100; 20
Hysteresis in 0.1°C 1 … 100; 20
Send current blocking status no • yes