elsner elektronik 70550 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 52

elsner elektronik 70550 Скачать руководство пользователя страница 6

4

Description

Actuator KNX S1R-B4 compact

• Version: 12.09.2022 • Technical changes and errors excepted.

For information on installation, maintenance, disposal, scope of
delivery and technical data, please refer to the installation
instructions.

2.

Description

The

Actuator KNX S1R-B4 compact

with integrated façade control has got a mul-

tifunctional output which can connect to either a drive with Up/Down control (blind,
awning, shutter, window) or two switchable devices (On/Off for light and ventilation).
Because the output is designed to be free of potential, other systems can also be con-
trolled, e.g. via the manual switch input on a motor control unit.

Automation can be specified externally or internally. Internally, there are numerous op-
tions available for blocking, locking (e.g. master-slave) and priority definitions (e.g.
manual-automatic). Scenes can be saved and called up via the bus (scene control with
16 scenes).

4 digital inputs are available for the connection of contacts like push-buttons.

Functions:

•

Free of potential

multifunctional output

for

a 230 V drive

(shading,

window)

or connection of two

switchable devices

(light, fan)

•

4 binary inputs

•

Position feedback

(movement position, also slat position for shutters)

•

Position storage

(movement position) via 1-bit object (storage and call-up

e.g. via buttons)

•

Parameters for taking drive and mechanics

downtimes

into account

•

Control via

internal or external automation functions

•

Integrated

shade control

with

slat adjustment

for shutters based on the

position of the sun

•

Scene control

for movement position with 16 scenes (also slat position for

shutters)

•

Mutual locking of two drives using

zero position sensors

prevents collisions

e.g. of shade and window (master–slave)

•

Blocking objects and alarm reports

have different priorities, so safety

functions always take precedence (e.g. wind block)

•

Manual or automatic

priority

setting via time or communication object

•

Brief time limit

(movement command blocked) and

2 movement limits

3.

Commissioning

Configuration is made using the KNX software as of ETS 5. The

product file

can be

downloaded from the ETS online catalogue and the Elsner Elektronik website on

www.elsner-elektronik.de

in the “Service” menu.

After the bus voltage has been applied, the device will enter an initialisation phase last-
ing approx. 5 seconds. During this phase no information can be received or sent via the
bus.

«
...
4
5
6
7
8
...
»

Содержание 70550





















































Отзывы:

Нет отзывов