Elmo T-200, Инструкция по эксплуатации

Страница: 12 / 78

PART NAMES AND FUNCTIONS
Projector
TOP/FRONT BOTTOM /BACK
Number Name Function
Related
Page
Lens
Project an image. P.20
Focus dial To focus the projected image. P.29
Speaker
Built-in speaker. -
Control panel To control the projector. P.13
Remote sensor
To receive IR signal from the remote
control.
P.19
Side panel
Terminal panel to connect other devices. P.15
Tilt stand Adjust the projection angle. P.21
Intake vent
Air ventilator inlet to cool down the inside
of the projector.
-
Exhaust vent
Air ventilator outlet to exhaust the air
inside of the projector.
-
Anti-theft security slot.
To connect a security cable.
-
MAINTENANCE This port is for maintenance only. -
Do not look into the lens during the projection. The strong light emitted from the lens
may cause damage to your eyes. Pay attention especially when you use the
projector in an environment where there are children.
Do not touch around the exhaust vent during or immediately after the projection. The
area around the exhaust vent may become very hot and could result in burn.
Hot air may be emitted from the exhaust vent. Do not place any objects, which are
easily affected by heat, in front of the exhaust vent.
CAUTION